Commercial

Delivering Optimal Business Efficiency in all areas of Commercial HVAC.

As a Mechanical Contractor the Commercial Division includes Project Management, Design Build and Construction Services.  HVAC projects include Rooftop Units, Make-Up Air and Exhaust Systems.  Stainless Steel Hoods and Backsplash. We also install Unit heaters, Infrared Tube Heaters and Humidification systems.  The Commercial division also entails Sheet Metal ventilation projects and installations.

 


Carrier Rooftop Unit Heating and Cooling Combined

weatherexpert

Offering a wide range of units sized according to your specific heating and cooling needs. Unit sizing starts at two tons cooling capacity and increases. Traditional is placed on rooftops, however placed on a pad or steel frame beside a building at low level for buildings that have roof’s that cannot support the weight is common as well

Optional economiser can be added to the unit to allow one to take advantage of “free cooling”. When the mechanical cooling locks out in low ambient conditions below the traditional 10 degrees Celsius, fresh air dampers open up allowing outside air to be brought in through the unit to cool the space.

 


Exhaust Fans

Exhaust FansShown is a downblast style exhaust fan. This style of fan is commonly used to exhaust a wide range of spaces. Bathroom’s, automotive shops, autobody shops, granite or machine shops, etc… Any space that requires a odor removed or an air change as per building code.

Many exhaust fans are installed in conjunction with a make up air unit. One is only allowed to remove a determined amount of air out of a space before they have to replace the air to equal out pressures.

 

 


Kitchen Exhaust Fans

Kitchen Exhaust FansShown is a upblast style exhaust fan that is commonly used for Kitchen exhaust. The design typically is placed on a roof however one can mount on the side of a structure. This design vents the exhaust fumes straight up and away from the building or structure. As well, it prevents any possible grease from staining the roof underneath the fan. The grease is collected in a tray mounted to the side of the van which requires cleaning periodically.

These fans are commonly installed with make up air units which replace the air removed from the space.

 


Filtered Make Up Air Units

Make-Up Air Unit InteriorMany spaces, as per building code, require a air change to ventilate for the safety of the staff and occupants inside. When the amount of air removed is above a certain point, the air must be pre heated. The most common method is with natural gas. Units such as Engineered air, ICE, and Captive Air are commonly used. The size of unit is determined according to ones requirement. A exhaust system is typically included with the instillation.

Traditionally these units are installed on roof top’s away from the common public and out of site. One could mount a unit on a concrete pad or a steel stand mounted to a building as a option. Unit sizing and CFM is determined according to the building requirement or an engineer’s specifications.

 


Kitchen Exhaust Canopies

Kitchen Exhaust CanopiesCanopies are designed to be strategically placed above a item that requires exhaust. Weather that be kitchen cooking stove equipment, a bread oven, a battery charging station for electric forklifts in a warehouse, laboratory equipment, etc…

The shape and style of canopy is designed according to ones needs. A small canopy over a small kitchen stove to a 20’ long canopy over a restaurant kitchen cook stove and prep area. The designs are specified to ones needs. Lights are commonly mounted inside canopies as a added feature, as is extraction filters to collect the grease.

Fire suppression system are typically required as per building code where grease is present.

Stainless steel back splash is commonly used behind kitchen hoods. This is where combustible building materials are present. For ease of cleaning the stainless backsplash is desired.

 


Infrared Tube Heaters

Garage Infrared Tube HeatersThis style of shop heating is commonly used in buildings and garages. They are typically quieter and require less maintenance as compared to a forced air style heater. They radiate the heat down towards the floor warming not only the air but the objects round. The objects retain the heat and stay warmer longer when cold air is allowed in. Where dust is present, this style of heater is preferred. Examples of this are carpentry shops, granite cutting shops, horse riding arena’s  etc… they have a sealed burner head in which one can pipe the intake air directly from the exterior of the building.

Infrasave and Calcana are popular styles seen throughout the city. They start at 40,000 BTU and larger. A 10’ length in smaller structures to a 70’ or 80’ run with a 90 degree bend following a perimeter of a building. These style of units are commonly chosen for different applications. Restaurants commonly use these above outside tables to keep patrons / customers warm in the lower ambient temperature conditions.

 


Shop Unit Heaters

Forced air unit heaters are commonly used for heating anything from a garage, utility shop, automotive shop, furniture showroom, etc… They range in size from a smell 30,000 BTU and up. Typically they are hung from the ceiling and vented either side wall or straight up through the roof. They are low profile and take up a minimal space in the structure. Typical maintenance is low, with simply keeping them clean by blowing out all parts and pieces via compressed air pending on the environment they are installed in.

 


Standard Fall Mount Exhaust Fans

Standard Wall Mounted Exhaust FansThis style of fan is commonly used for side wall discharge. They are relatively simple to install and typically require a sheet metal rain hood on the exterior pending on the location of the fan. This particular style commonly come with a back draft damper built in to prevent drafts from entering into the structure in the off cycle. Prop fans can be used in many different applications from shop use, common exhaust, and even cooling purposes.

Pending on the amount of air to be ventilated in the space, this style of fan may be installed in conjunction with a make-up air unit.

 


Thermostats

Thermostats have really evolved over the years. There is many different models to choose from. Honeywell, White Rodgers, Carrier brands, etc...From a traditional swing arm style to a basic digital: to a programmable thermostat to a style that can be hooked up to the internet and operated via your hand held device anywhere in the world. Thermostats can be chosen to fit each person or business needs.  Wireless thermostats have been a popular choice for quite some time due to the face in certain situations, there is no possible way to get the required wires from the appliance to the thermostat location. A module mounts beside the appliance and communicates wireless to the thermostat in the space controlled.

Thermostats have really evolved over the years. There is many different models to choose from. Honeywell, White Rodgers, Carrier brands, etc… From a traditional swing arm style to a basic digital: to a programmable thermostat to a style that can be hooked up to the internet and operated via your hand held device anywhere in the world. Thermostats can be chosen to fit each person or business needs.

Wireless thermostats have been a popular choice for quite some time due to the face in certain situations, there is no possible way to get the required wires from the appliance to the thermostat location. A module mounts beside the appliance and communicates wireless to the thermostat in the space controlled.

 


 

COMPLIMENTARY SERVICES

gear-clip-art-BulletFree Quotes

gear-clip-art-BulletQuality Customer Service

gear-clip-art-BulletScheduling with you in Mind

gear-clip-art-BulletExperience in the Industry

gear-clip-art-BulletLicensed, Bonded and Insured